.
Additional Items Required ( Not Included in Kit)
Note: These are parts that we have used and are familiar with. There are many other brands available and you may
substitute other items that you are more comfortable with or have on hand.
1 Engine
Norvel Big Mig .049 or Norvel Big Mig .061
3 Hinges
Sig Easy Hinges #SH-710 or Du-Bro Kwik Hinge #537
1 Motor Mount
Dave Brown #0506
4 Motor Mount Screws and Blind Nuts
4-40x3/4" Machine Screws and Blind Nuts Sig #SH-III or Du-Bro #129
1 Fuel Tank
Sullivan loz. #SS-I or 20z. #SS-2
1 1/2-A Fuel Line
Sig #SH288 or Du-Bro #221
4 Servo Connectors
Sig #SH-736 or Du-Bro #121
1 White Covering Material
1 Roll Top Flite Monokote, Jet White #TOPQ0204
1 Trim Covering Material
Your choice
1 Propeller
Grish Tornado 6-3 Nylon Propeller #GRlQI050
8 Rubber Bands (wing attach)
Sig #SH-340
3 3/32" Wheel Collars
Sig #SH-585 or Du-Bro #138
2 Main Wheels Dave
Brown Lectra Lite Wheels #5620
1 Nose Wheel Dave
Brown Lectra Lite Wheel #5617
3 Wheel Bushings
Make from K&S Brass Tube #127
General Note: Cover the plans with wax paper before assembling your model to prevent the parts from sticking to the plan.
Building the Tail Surfaces
1.
Join R-I and R-2 together over the plan. Temporarily hinge the rudder (R-3) to the fin. Do not glue the hinges at this time.
2.
Join the elevators using the 1/8" dowel. Use the plan and the stabilizer as a guide. Trim the dowel as required to achieve the
proper length.
3.
Temporarily hinge the elevators to the stabilizer. Do not glue the hinges at this time.
4.
Sand the tail surfaces smooth and round all of the edges except the bottom edge of the fin.
Building the Fuselage
5.
Assemble the left fuselage side (F-1). Glue parts F-1A (L), F-1B (L) and F-1C (L) together as shown on the plan. The letter
"L" is on the inside of the left fuselage side parts and should face up on all the parts. When the glue is dry, glue part F-2 (L)
into position on the inside of the left fuselage side. Crack part F-3 (L) at the dashed line cut into it at the rear of the part and
glue it into position on the inside of the left fuselage side.
6.
Build the right fuselage side as you did the left. The parts for the right fuselage side are marked with an "R" on the inside of
each piece.
