Keep your proof of purchase and product serial number for warranty
INTRODUCTION
Thank you for selecting the Sig Marine Cozy Cabin Propane bottom assembly. Your unit
was carefully inspected and tested at our factory.
Because of the continuing refinement of our product designs, your heater may possess
features that are not discussed in this manual. We have tried to supply all the information
you might need, so please take time to read this manual before installing and using your
Cozy Cabin Heater.
The most important reason to carefully read this manual is that many of its instructions
are essential to the safe operation of your Cozy Cabin Heater.
Should any question arise requiring personal help, we ask that you contact your dealer or
Sig Marine, quoting both the model and serial number printed on the product
identification label.
SAFETY AND INSTALLATION
General
The Cozy Cabin Heater Bottom Assembly # 10400 is manufactured for the Model 10000,
and is designed to be fuelled only by low pressure liquid propane gas (LPG). If
compressed natural gas (CNG) is used in this heater the burner flame will be inadequate
for heating.
Propane is an excellent and convenient fuel if used in accordance with rules, safety and
common sense.
Propane (LPG) Fuel System
1.
Buy your cylinder, gauge, master solenoid valve and hose from a reputable marine
dealer, or your local LPG service center.
a)
We specifically recommend that only a high quality regulator be used with
your Sig Marine Cozy Cabin Heater. It must be set at 11” water column.
(In Europe this is sometimes expressed as .0274bar and is close to .5psi).
Summary of Contents for 10400
Page 9: ......
