21
INSTALLATION & OPERATION
1
4.0mm
400-500
300-400
200-320
§3.4.7 Wireless Foot Pedal Configuration
TIG series of welding machines can be configured to communicate exclusively with
wireless foot pedal. This is done by a simple process of synchronising the wireless
remote control and the machine frequencies. Each interface frequency assigned is
unique, so it is possible to use several wireless control systems/ machines in the same
area with no problems. The direct range of the wireless control system is approximately
100m, this will be affected by the physical location of the machine and the remote
control.
Socket Pin
Function
1
Not connected
2
Not connected
3
Not connected
4
Not connected
5
Not connected
6
The button of "UP" input
7
The button of "DOWN" input
8
Trigger Switch Input
9
Trigger Switch Input
10
Not connected
11
The button of "UP"& "DOWN" input
12
Not connected
Remote Control Socket
INSTALLATION & OPERATION
3
• Have a more consistent arc
The included angle determines weld bead shape and size. Generally, as the included
angle increases, penetration increases and bead width decreases.
Tungsten
Diameter
Diameter at
the Tip - mm
Constant Included
Angle - Degrees
Current Range
Amps
Current Range
Pulsed Amps
1.0mm
.250
20
05 - 30
05 - 60
1.6mm
.500
25
08 - 50
05 - 100
1.6mm
.800
30
10 - 70
10 - 140
2.4mm
.800
35
12 - 90
12 - 180
2.4mm
1.100
45
15 - 150
15 - 250
3.2mm
1.100
60
20 - 200
20 - 300
3.2mm
1.500
90
25 - 250
25 - 350
§3.4.7 Gun switch control current
UP/DOWN GUN
Remote Control Socket
3.1 Switch Torch Control
Remote Control Socket
Torch switch
Adjust current button,
when it’s pushed up, the
current increase, when
it’s pushed down, the
current decrease.
