SifWeld Evolution TS320ACDC, Operation Manual

Page: 15 / 28

15
2.4 TIG Spot Display
INSTALLATION & OPERATION
1
§3.2.5 TIG Spot display introduction
1. Current display : 10-400A (320A for BT TIG 321).
2. T
on
display : 0.1 - 1.0s.
3. T
off
display : off - 10.0s.
§3.2.6 JOB Program introduction
1. Welding mode display : Here are selected welding states.
2. Parameters display : Here are all selected parameters values.
3. JOB number : A total 1-10 JOB numbers can store or call the selected parameters
by JOB key.
4. Load/ Delete display
: Press Function A/B key to call/delete parameters setting for
the selected JOB number.
1. Current display: 10-400A (320A for BT TIG 321).
2. Ton display: 0.1 - 1.0s.
3. Toff display: off - 10.0s.
2.5 JOB Programme
INSTALLATION & OPERATION
1
§3.2.5 TIG Spot display introduction
1. Current display : 10-400A (320A for BT TIG 321).
2. T
on
display : 0.1 - 1.0s.
3. T
off
display : off - 10.0s.
§3.2.6 JOB Program introduction
1. Welding mode display : Here are selected welding states.
2. Parameters display : Here are all selected parameters values.
3. JOB number : A total 1-10 JOB numbers can store or call the selected parameters
by JOB key.
4. Load/ Delete display : Press Function A/B key to call/delete parameters setting for
the selected JOB number.
1. Welding mode display: Here are selected welding states.
2. Parameters display: Here are all selected parameters values.
3. JOB number: A total 1-10 JOB numbers can store or call the selected parameters by JOB key.
4. Load/ Delete display: Press Function A/B key to call/delete parameters setting for the selected
JOB number.