17
PANEL FUNCTIONS & DESCRIPTIONS
11
2. Pre flow time
: 0~10s.
3. Post flow time
: 0~10s.
4. Burnback
: 0~10.
5. Slow feed time
: 0~10s.
Burnback
Short-circuit between welding wire and molten pool leads to the increase of current,
which leads to the melting speed of welding wire too fast, and the wire feeding speed
cannot keep up with, which makes the welding wire and workpiece disconnected. This
phenomenon is called “burn back”. This function is to ensure the welding seam is not
beautiful after welding. Range: 0-10.
Slow feed
This function is used to regulate the speed of wire feeding increasing. Range: 0-10s.
MIG SYN control panel
1. Welding mode button
: Press it to select MIG SYN welding mode.
2. L parameter knob
: Rotate it to adjust wire feeding speed. In functional parameter
interface, rotate it to select parameters.
3. R parameter knob
: Rotate it to adjust parameters.
4. Functional parameter button
.
5. Cooling mode button
: Press it to select water cooling mode.
6. Manual shield gas check button.
7. Manual wire feed button.
1. Welding mode button
Press it to select MIG Pulse or Dual Pulse welding mode.
2. Left parameter knob
Rotate it to adjust wire feeding speed. In functional parameter interface, rotate it to select parameters.
3. Right parameter knob
Rotate it to adjust parameters.
4. Functional button.
5. Cooling mode button
Press it to select water cooling mode.
6. Manual shield gas check button.
7. Manual wire feed button.
Summary of Contents for Evolution MTS500 DP
Page 44: ...44 Notes ...
Page 45: ...45 Notes ...
