25
12.
Assemble front end parts of the TIG torch,
fitting a sharpened tungsten suitable for the
material to be welded.
13.
Lay the outside edge of the cup on work
piece with the tungsten Electrode 1-2mm from
the work piece. Press and hold the trigger button
on TIG torch to start the gas flow.
14.
With a small movement rotate the gas
cup forward so that the tungsten electrode
touches the work piece.
15.
Now rotate the Gas Cup in the reverse
direction to lift the Tungsten electrode from
the work piece to create the arc.
16.
Release the trigger to stop the welding.
IMPORTANT! –
It is recommended that you check for gas leaks prior to operation and that the operator
close the cylinder valve when the machine is not in use.
