13
INSTALLATION & OPERATION
9
§3.2.3 HF/LIFT TIG display introduction
1. Welding mode key
: Press it to enter HF TIG or Lift TIG welding mode.
2. Output waveform key
: Press it to select DC output or AC wave output.
3. Trigger mode key
: Press it to select 2T or 4T trigger mode.
4. Welding function key
: Press it to select No Pulse/ Pulse/ Spot welding function.
(Here is no Spot function in Lift TIG welding mode and AC mode.)
5. Parameter A key
: Press it to select AC Balance. Setting range: -5 to +5.
2.2 HF/LIFT TIG Display
1. Welding mode key:
Press it to enter HF TIG or Lift TIG welding mode.
2. Output waveform key:
Press it to select DC output or AC wave output.
3. Trigger mode key:
Press it to select 2T or 4T trigger mode.
4. Welding function key:
Press it to select No Pulse/ Pulse/ Spot welding function.
(Here is no Spot function in Lift TIG welding mode and AC mode.)
5. Parameter A key:
Press it to select AC Balance. Setting range: -5 to +5.