6
ESC/RECALL MEM
key used for:
Access to the data saved in the memory (if present)
From a parameter se ng screen or memory data display screen,
pressing the key once allows returning to the previous screen
SAVE
key used for:
Once a measurement has been completed, pressing the key once
allows saving the results in the memory
From a parameter se ng screen, pressing the key once allows
saving the changes made to the parameters
START/STOP
key used for:
Start and/or stop a measurement
Table 1: Descrip on of func on keys
4.3
DESCRIPTION OF DISPLAY
Symbol
Descrip on
Display group 1 shows:
Insula on resistance
Dielectric leakage current
PI (Polariza on Index)
DAR (Dielectric Absorp on Ra o)
Capacitance
Display group 2 shows:
Nominal test voltage
Generated test voltage
Display group 3 shows the dura on me of the test
Bargraph
Modes available test : FIX, ADJUST and RAMP
,
,
“Flash”, Alarm (values over limits), “Warning” symbols
,
,
“Low ba ery", “Mains supply", “Timer” symbols
“Number of test cycles” symbol
Table 2: Descrip on of symbols of display