Sierra Instruction Manual
MaxTrak 180
3
Warnings in This Manual
“Warning,” “Attention,” and “Note” statements are used
throughout this manual to draw your attention to
important information.
Symbol Key
Symbol
Symbol
Meaning
Descripition
Warning
“Warning” statements appears with information that is important to
protect people and equipment from damage. Pay very close attention
to all warnings that apply to your application.
Failure to comply with
these instructions may damage the meter and cause personal
injury.
Caution
“Attention” indicates that failure to comply with stated instructions
may result in damage or faulty operation of the meter.
Note
“Note” indicates that ignoring the relevant requirements or
precautions may result in flow meter damage or malfunction.
Receipt of System Components
When receiving a Sierra mass flow meter, carefully check the outside packing carton for damage incurred in
shipment. If the carton is damaged, notify the local carrier and submit a report to the factory or distributor.
Remove the packing slip and check that all ordered components are present. Make sure any spare parts or
accessories are not discarded with the packing material. Do not return any equipment to
the factory
without first contacting Sierra Customer Service
.
Technical Assistance
If you encounter a problem with your flow meter, review the configuration information for each step of the
installation, operation, and setup procedures. Verify that your settings and adjustments are consistent with
factory recommendations. Installation and troubleshooting information can be found in the Chapter 2
(Installation) and Chapter 4 (Troubleshooting) of this manual.
If the problem persists after following the troubleshooting procedures outlined in Chapter 4 of this manual,
contact Sierra Instruments by fax or by e-mail (see inside front cover). For urgent phone support you may
call (800) 866-0200 or (831) 373-0200 between 8:00 a.m. and 5:00 p.m. PST. In Europe, contact Sierra
Instruments Europe at +31 72 5071400. In the Asia-Pacific region, contact Sierra Instruments Asia at +8621
5879 8521. When contacting Technical Support, make sure to include this information:
Summary of Contents for C100L-L-DD-LE-5-OV1-SV1-PV1C-V1-S1
