Appendix A. AceManager Setup without Template File
•
S23 – Configure Serial Port – The baud rate needs to be configured to
match a valid datalogger baud rate. For a CR10X: 9600,8N1 and for a
CR1000: 115200,8N1.
•
\Q – Serial Port Flow Control – This should be set to None.
•
V – AT Verbose Mode – Set this to Verbose for CR800, CR1000,
CR3000; Numeric for CR10(X), CR510, CR23X.
•
&D – DTR Mode – Set to Ignore DTR
•
S211 – DTR Mode – Set to Ignore DTR
A-2
Summary of Contents for RavenXTV
Page 2: ......
Page 32: ...Appendix A AceManager Setup without Template File A 4 This is a blank page...
Page 39: ......
