RavenXTV CDMA Sierra Wireless Cellular Modem
Select the “Serial” Group, and make sure the “AT Verbose Mode” is set to
“Numeric” for use with the CR10(X), CR510, and CR23X dataloggers, or
“Verbose” for other dataloggers (e.g. CR1000).
If the modem answers but you do not get a connection to the datalogger:
1. Check your connection to the datalogger.
a.
a. An SC932A or SC105 interface is required to connect the modem
to a datalogger’s CS I/O port (Section 4). The default settings for
SC105 (OS > 4) can be used with the RavenXTV when the modem is
configured for 115200 baud (baud rate is set by the template file).
19
Summary of Contents for RavenXTV
Page 2: ......
Page 32: ...Appendix A AceManager Setup without Template File A 4 This is a blank page...
Page 39: ......
