4115102
Rev 1.1
February 21, 2014
23
6. Insertion and Removal Guidelines
6.1.
Insertion Guideline
1.
Check the alignment of Pin 1 on both the module and the Snap-in socket.
2.
Put the module down in the socket. Use vertical motion to insert the module.
3.
Check the orientation of the cover based on the location of Pin 1.
Pin 1 location on the Snap-in socket (triangle)
Pin 1 location on the module (black dot)
Pin 1 location on the module (black dot)
Pin 1 of the module should align with this