Sierra Wireless AirPrime EM7700, Hardware Integration Manual

Page: 7 / 26

Rev 2 Apr.12 Proprietary and Confidential 7
1 1: Introduction
Sierra Wireless’ AirPrime Intelligent Embedded Modules form the
radio component for the products in which they are embedded.
The AirPrime EM7700 is available for use on LTE and HSPA+
networks.
Note: An understanding of
network technology, and
experience in integrating
hardware components into
electronic equipment is
assumed.
Purpose of this guide
This guide addresses issues that affect the integration of AirPrime
embedded modules into host products, and includes design
recommendations for the host products.
The Universal Development Kit
A hardware development platform is available from Sierra Wireless
for evaluating and developing with the EM7700. The Universal
Development Kit (UDK) (for AirPrime MC-series modules) and a
separate adapter board and RF cable may be ordered to use the
UDK with the EM7700.
The UDK contains hardware components for evaluating and
developing with the module, including:
• Development board
• Cables
• Antennas (Band 17 is not supported by supplied antennas)
• Documentation suite
• Other accessories
For instructions on setting up the UDK, see PCI Express Mini Card
Dev Kit Quick Start Guide (Document 2130705) .
For over-the-air LTE testing, ensure that suitable antennas are used.
(Two antennas are required for this testing; Sierra Wireless offers an
LTE-capable antenna covering 700–2600 MHz BW—please order
part number 6000492 (Qty 1—this contains two antennas).)