Sierra Wireless AirPrime EM7700 Hardware Integration Manual Download Page 4

Page: 4 / 26

AirPrime EM7700 Hardware Integration Guide

Proprietary and Confidential

4112206

Patents

This product may contain technology developed by or for Sierra Wireless Inc.

This product includes technology licensed from QUALCOMM

This product is manufactured or sold by Sierra Wireless Inc. or its affiliates under
one or more patents licensed from InterDigital Group.

Copyright

Trademarks

Sierra Wireless

™

, AirPrime

™

, Watcher

™

, and the Sierra Wireless logo are

trademarks of Sierra Wireless.

Windows

is a registered trademark of Microsoft Corporation.

Other trademarks are the property of their respective owners.

Contact
Information

Consult our website for up-to-date product descriptions, documentation,
application notes, firmware upgrades, troubleshooting tips, and press releases:

www.sierrawireless.com

Revision
History

Sales Desk:

Phone:

1-604-232-1488

Hours:

8:00

to 5:00

Pacific Time

E-mail:

[email protected]

Post:

Sierra Wireless
13811 Wireless Way
Richmond, BC
Canada V6V 3A4

Fax:

1-604-231-1109

Web:

www.sierrawireless.com

Revision
number

Release date

Changes

April 2012

•

FCC submission

April 2012

•

Updated gain values in Regulatory section

Summary of Contents for AirPrime EM7700



























Search results

Summary of Contents for AirPrime EM7700

Reviews:

Related manuals for AirPrime EM7700

Brands by name

Popular brands

Sierra Wireless AirPrime EM7700, Hardware Integration Manual

Search results

Summary of Contents for AirPrime EM7700

Reviews:

Related manuals for AirPrime EM7700

Brands by name

Popular brands