Raven 1x
124
20070914
*SNTPADDR=
[d.d.d.d][name]
SNTP
Server
IP
address,
or
fully
‐
qualified
domain
name,
to
use
if
*SNTP=1.
If
blank,
time.nist.gov
is
used.
•
d.d.d.d=IP
address
•
name=domain
name
*TELNETTIMEOUT=
n
Telnet
port
inactivity
time
out.
By
default,
this
value
is
set
to
close
the
AT
telnet
connection
if
no
data
is
received
for
2
minutes.
•
n=minutes
*TPORT=
n
Sets
or
queries
the
port
used
for
the
AT
Telnet
server.
If
0
is
specified,
the
AT
Telnet
server
will
be
disabled.
The
default
value
is
2332.
•
n=0
:
Disabled.
•
n=1
‐
65535
Tip: Many networks have the ports below 1024 blocked. It is recom-
mended to use a higher numbered port.
*TQUIT
Disconnects
the
telnet
session.
Not
available
in
AceManager..
Friends
Friends
Mode
can
limit
access
to
the
Raven
from
the
cellular
network
and
the
Internet.
Friends
mode
is
a
basic
firewall.
Caution: If you are using Friends Mode you will not be able to use
AceManager remotely or Telnet to the modem unless you are
contacting the modem from one of the configured IP addresses.
Note: Friends Mode will only prevent the Raven modem from
receiving data from those IP addresses not on the Friends List. It
cannot prevent data, such as pings, from traversing the network to the
modem which may billable traffic even though the modem does not
receive the data.
