Configuration Commands
Rev 3.0B Feb.08
101
*NETROAMPREF=
n
Allow
configuration
of
the
roaming
preference.
•
n=0
:
Restrict
to
home
network
only.
•
n=1
‐
3
:
Allow
roaming
to
affiliated
networks.
n=3
*NETUID=
uid
The
login
that
is
used
to
login
to
the
cellular
network,
when
required.
•
uid=user
id
(up
to
64
bytes)
*STATICIP=
d.d.d.d
Set
the
static
IP
required
to
be
received
from
the
network.
If
the
modem
does
not
get
this
IP
address
from
the
network,
it
will
reset
the
internal
hardware
and
try
again.
The
default
is
0.0.0.0,
which
allows
any
IP
address
from
the
network.
•
d.d.d.d=IP
address
Example:
AT*STATICIP=192.168.1.23
Caution: STATICIP does not set the IP address of the modem, it
merely tells the modem which IP address to expect. If the expected IP
address is not granted while registering on the cellular network, the
modem will try to register on the network again until it receives that IP
address. If your account is set up for a dynamic IP address and you
set an address for *STATICIP, you may not be able to register on the
network at all since there is no guarantee you will receive the same
dynamic IP address again.
*STATUSCHK=
n
Checks
if
an
SMS
message
has
been
received
by
the
modem.
•
n=1
‐
255
:
Seconds
between
checks.
•
n=0
:
Never
check.
Serial
This
group
includes
commands
specific
to
general
use
of
the
serial
port.
