Sierra Wireless AirCard 850, Installation Manual, Page: 26 / 34

AirCard 800 Series Installation Guide
26 2130623
colocated with any other transmitter or antenna within a
host device.
3. A user manual with the end product must clearly indicate
the operating requirements and conditions that must be
observed to ensure compliance with current FCC / IC RF
exposure guidelines.
4. The end product with an embedded AirCard 850 / 860 /
875 /880 / 881 / 880E / 881E wireless network card must
pass the unintentional emission testing and properly
authorized per FCC Part 15 requirements where appli ‐
cable.
Note: If these wireless network cards are intended for use in a
portable device, you are responsible for separate approval to satisfy
the SAR requirements of FCC Part 2.1093 and IC RSS-102.
AirCard 850 / 860 wireless network cards
1. To comply with FCC / IC regulations limiting both
maximum RF output power and human exposure to RF
radiation, the maximum antenna gain must not exceed
8 dBi in the Cellular band and 4 dBi in the PCS band.
2. A label must be affixed to the outside of the end product
into which the AirCard wireless network card is incorpo ‐
rated, with a statement similar to the following:
• For an end product with an embedded AirCard 850
wireless network card:
This device contains FCC ID: N7NAC850.
• For an end product with an embedded AirCard 860
wireless network card:
This device contains FCC ID: N7NAC860.
This equipment contains equipment certified under IC:
2417C ‐ AC860 .
AirCard 875 / 880 / 881 / 880E / 881E
1. To comply with FCC / IC regulations limiting both
maximum RF output power and human exposure to RF
radiation, the maximum antenna gain must not exceed
5 dBi in the Cellular band and 4 dBi in the PCS band.
2. A label must be affixed to the outside of the end product
into which the AirCard wireless network card is incorpo ‐
rated, with a statement similar to the following:
• For an end product with an embedded AirCard 875
wireless network card:
This device contains FCC ID: N7NAC875.