manualshive.com logo in svg

Siemens XT65, Hardware Overview, Page: 11 / 58

Share
Download
Siemens XT65 Hardware Overview Download Page 11

XT65/XT75 Hardware Interface Overview 

1.3 Regulatory and Type Approval Information

s

XT65_XT75_HO_v00.130

Page 11 of 67

2006-10-12

Confidential / Preliminary

1.3.2

SAR requirements specific to portable mobiles

Mobile phones, PDAs or other portable transmitters and receivers incorporating a GSM module must be in accor-

dance with the guidelines for human exposure to radio frequency energy. This requires the Specific Absorption

Rate (SAR) of portable XT65/XT75 based applications to be evaluated and approved for compliance with

national and/or international regulations. 

Since the SAR value varies significantly with the individual product design manufacturers are advised to submit

their product for approval if designed for portable use. For European and US markets the relevant directives are

mentioned below. It is the responsibility of the manufacturer of the final product to verify whether or not further

standards, recommendations or directives are in force outside these areas. 

Products intended for sale on US markets

ES 59005/ANSI C95.1 Considerations for evaluation of human exposure to Electromagnetic Fields (EMFs)

from Mobile Telecommunication Equipment (MTE) in the frequency range 

30MHz - 6GHz 

Products intended for sale on European markets

EN 50360

Product standard to demonstrate the compliance of mobile phones with the basic

restrictions related to human exposure to electromagnetic fields (300MHz - 3GHz)

IMPORTANT:

Manufacturers of portable applications based on XT65/XT75 modules are required to have their final product cer-

tified and apply for their own FCC Grant and Industry Canada Certificate related to the specific portable mobile.

See also 

Section 8.2

.

GCF-CC V3.21.0 

Global Certification Forum - Certification Criteria

ETSI EN 301 489-1 

V1.4.1

Candidate Harmonized European Standard (Telecommunications series) Electro 

Magnetic Compatibility and Radio spectrum Matters (ERM); Electro Magnetic 

Compatibility (EMC) standard for radio equipment and services; Part 1: Common 

Technical Requirements

ETSI EN 301 489-7 

V1.2.1 (2000-09)

Candidate Harmonized European Standard (Telecommunications series) Electro 

Magnetic Compatibility and Radio spectrum Matters (ERM); Electro Magnetic 

Compatibility (EMC) standard for radio equipment and services; Part 7: Specific 

conditions for mobile and portable radio and ancillary equipment of digital cellular 

radio telecommunications systems (GSM and DCS)

IEC/EN 60950-1 (2001)

Safety of information technology equipment (2000)

Table 4:  

Requirements of quality

IEC 60068

Environmental testing

DIN EN 60529

IP codes

Table 3:  

Standards of European type approval

Summary of Contents for XT65



























































Reviews:

No comments