en
Getting to know your appliance
12
Tap
|
flashes
The tap has not been turned on or there is no
water pressure.
|
is lit
Water pressure too low. This extends the pro-
gramme duration.
Overdosage
Å
flashes
too much foam detected, one rinse cycle
switched on
Childproof lock
w
is lit
Childlock has been activated
Door
|
flashes
When the programme has started: Door not
closed properly.
OPEN
Open door if programme interrupted
YES is lit
Door can be opened. Topping up laundry
NO
Door cannot be opened
NO flashes
Wait until YES is lit.
è
On if drying programme is selected.
H
: Programme information.
Time:
1:50
Programme duration after programme selec-
tion in h:min (hours:minutes)
1 – 24 h
Finished in time in h (h=hour)
7.5*kg
max. load
programme status:
End
Programme duration or end
PAUS
Programme interrupted
– – – –
End of programme by Rinse stop
Door open information:
OPEN
open door if programme interrupted
YES is lit
Door can be opened. Topping up laundry
NO
Door cannot be opened
NO flashes
Wait until YES is lit
Further information:
E : - -
Fault display
0
Adjusting the signal volume
Drying mode and the drying time:
AUT1
Auto-Dry mode 1
AUT2
Auto-Dry mode 2, Extra dry for drying pro-
gramme.
120
Selected drying time.
OFF
Drying programme is deactivated.
Displays for the selected programme