en
Setting the signal
28
M
Setting the signal
Setting the signal
1. Activate setting mode for signal volume
turn to
Off
turn one position
to the right
Press and hold ° C one
step clockwise
Release the button
2. Set volume for button signals (depending on model)
press the
0
button until the required
volume is reached
to step 3. or
set to
Off
, setting mode for signal volume is
left
3. Selecting volume of the information signals
turn one position to the right
press the
0
button until the
required volume is reached
set to
Off
, setting mode for signal
volume is left
