Page EN-4
XLT Series Transducers - OPERATING MANUAL
A5E32280448
mmmmm
English
• The certification of the XLT range of transducers relies upon the use of following materials
in the construction:
Aggressive Substances: acidic liquids or gases that may attack metals or solvents that may
affect polymeric materials.
Suitable Precautions:
regular checks as part of routine inspections or establishing from
the material’s data sheet that it is resistant to specific chemicals.
For manual override, use the disconnect switch provided in the building installation of the
associated controller.
XLT Series Product Marking
Enclosure:
Aluminum
Encapsulant: Durapot 861-F3 / 864
WARNING:
If the equipment is likely to come into contact with aggressive
substances, then it is the responsibility of the user to take suitable precautions
that prevent it from being adversely affected, thus ensuring that the type of
protection is not compromised.
WARNING:
This product is designated as a Pressure Accessory per Directive
(7/23/EC and is not intended for use as a safety device.
R
II 2 G 1D T3
II 2 GD T3
EEx m I I T3
SIRA 01ATEX5294X
Assembled in Canada with domestic
and imported parts
Siemens Milltronics Process Instruments, Peterborough
Class I, Div 1,
Gr. A, B, C, D
Class II, Gr. E, F, G
PER DWG # 0-8830004Z-DI-A
TEMP. CODE: T3C
Class I, Div 2, Gr. A, B, C, D
Class II, Div 2, Gr. F, G
PER DWG # 0-9650016Z-DI-A
0518
Ex mb IIC T3 Gb
Ex tb IIIC T200 °C Db
DNV 12.0076 X
XLT-xx
ULTRASONIC TRANSDUCER
Serial No.: GYZ / V1034567
Type: FLEXURAL MODE
Enclosure: IP68
Amb. Temp.: – 40°C to 150°C
Max. Input Current: 44.2 mA r.m.s.
Max. Input Voltage: 1.77 V r.m.s.; 250 Vp
KCC-REM-S49
Echomax
OCP 0017
