Installation and connection
en
17
2.
Remove the screws from the dryer
and then remove the dryer door.
Note:
Use a T20 (Torx) screwdriver
only. Do not use any other tools to
change the side on which the door is
hinged.
3.
Carefully place the dryer door onto a
flat surface, and place a hand towel
or other such item between the door
and the surface to avoid scratching
or damaging the door.
4.
Now remove the screws from the
door hinge, and remove the hinge
from the dryer door.
5.
Remove the screws from the door
handle on the dryer door and
remove the door handle.
6.
Unlock the door ring.
7.
Now lift the dryer door from the door
ring. Rotate the dryer door and place
it back onto the door ring in the
corresponding place.
8.
Remove the screws from the top and
bottom of the dryer door.
