en
Installation and connection
16
6.
Pull out the condensate container
fully.
7.
Turn the condensation container
180° onto its underside and remove
the stopper that is fitted.Turn the
condensate container back over and
insert the stopper into the recess in
the top of the condensation
container.
8.
Pull the filter out of the lock-in slot
and place it into the recess in the top
of the condensation container.
9.
Slide in the condensate container
until it clicks into place.
The condensation is now discharged via
the drain hose into the waste-water
system or into a wash basin
Note:
If you want to change the
condensation drain back to the
condensation container, carry out all
these steps in reverse order.
Changing the side on which
the door is hinged
Proceed as follows to change
the side on which the door is hinged:
1.
Set the programme selector to the
"Off" position, disconnect the dryer
from the mains and open the door.
