Positioning and connecting
en
37
11.
Close the detergent drawer.
12.
Select
!
Start
/Reload.
13.
At the end of the programme set the
programme selector to
Off
.
Your washing machine is now ready to
use.
Transportation
Preparatory work
1.
Turn off the tap.
2.
Reduce the water pressure in the
supply hose. Cleaning and
maintenance – Clean the water inlet
filter
3.
Drain the remaining detergent
solution. Cleaning and maintenance
– Drain pump blocked
4.
Disconnect the washing machine
from the mains.
5.
Remove the hoses.
Installing transportation protection
devices:
1.
Remove the covers and keep in a
safe place.
If required, use a screwdriver.
2.
Insert all 4 sleeves.
Clamp the mains cable on the
holders. Insert and tighten the bolts.
Before switching on the appliance:
Notes
■
The transport locks
must
be
removed!
■
To prevent unused detergent from
flowing into the outlet during the next
wash: Pour 1 litre of water into
dispenser
II
and start the
0
p
Spin/
Empty
programme: (if only
a drained cycle is required: set rpm
(spin speed) to - - -).
