en
Operating the appliance
16
Select additional programme
settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
The settings can be selected or
deselected depending on the
programme progress.
The indicator lamp for the button lights
up if a setting is active.
The settings are not saved when the
appliance is switched off.
"Additional programme settings"
Overview of programmes
~
Supplementary sheet for the operating
and installation instructions.
Placing laundry into the drum
:
Warning
Danger of death!
Items of laundry pretreated with
cleaning agents that contain solvents,
e.g. stain remover/cleaning solvent,
may cause an explosion after being
loaded into the washing machine.
Hand-rinse items of laundry thoroughly
beforehand.
Notes
■
Mix items of laundry of varying sizes.
Laundry items of different sizes
distribute themselves better during
the spin cycle. Individual items of
laundry may lead to imbalances.
■
Observe the specified maximum
load. Overfilling has a negative
impact on the washing result and
promotes creasing.
1.
Place presorted items of laundry
unfolded in the washing drum.
2.
Make sure that no items of laundry
are trapped between the washing
machine door and the rubber seal,
and close the door.
The
‹
button indicator lamp flashes to
indicate that the washing program can
be started. It is possible to change the
settings.
Measure and add detergent
and care products
Caution!
Damage to the appliance!
Detergents and agents for the
pretreatment of laundry (e.g. stain
remover, prewash sprays, etc.) may
damage the surfaces of the washer
dryer.
Keep these agents away from the
surfaces of the washing machine. Using
a damp cloth, immediately remove any
fine spray residue and other residue or
droplets.
Dosing
Dose the detergents and care products
according to:
■
water hardness (ask your water
supply company),
■
the manufacturer’s specifications on
the packaging,
■
the amount of laundry,
■
soiling.
