Siemens WM16Y8891W Instruction Manual And Installation Instructions Download Page 8

Page: 8 / 60

Environmental protection

Environmental protection

Environmental protection

Packaging/used appliance

Dispose of packaging in an environmentally-responsible manner.

Keep children away from the packaging materials and packaging materials are not

toys.

Reprocessing and reuse of packaging material saves raw materials, reducing waste.

All packaging materials used are in line with environmental protection requirements

and reusable.

Name and content of hazardous substances in products

Note:

All of component parts in the BSH products that fall into the same category

are covered in the table above, the component parts of this product depend on the

actual situation. If you have any questions, please contact us by dialling the

customer service number in the product.

Component

name

Hazardous substance

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

chromium

(Cr(VI))

Polybrominated

biphenyls (PBB)

Polybromin-

ated diphenyl

ethers (PBDE)

PCB

Display

Controller

Power cord and

connect wiring

harness

Pumps and

drives

Housing

Door and its

constituent parts

Drum-system

and its

constituent parts

Water supply

components

(exempted dryer)

This table was developed according to the provisions of SJ/T 11364.

The content of such hazardous substance in all homogeneous materials of such component is below

the limit required by GB/T 26572.

x The content of such hazardous substance in a certain homogeneous materials of such component is

beyond the limit required by GB/T 26572.

Summary of Contents for WM16Y8891W





























































Search results

Summary of Contents for WM16Y8891W

Reviews:

Related manuals for WM16Y8891W

Brands by name

Popular brands

Siemens WM16Y8891W, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WM16Y8891W

Reviews:

Related manuals for WM16Y8891W

Brands by name

Popular brands