Siemens WM16XM50NL User Manual And Installation Instructions Download

Page: 9 / 56

SafetyNL

Reaching into the rotating drum can cause injury to hands.

▶

Wait for the drum to come to a complete stop before reaching inside the
drum with your hand.

CAUTION ‒ Risk of burns!

The soap gets hot when washing at high temperatures.

▶

Do not touch the hot soapy water.

CAUTION ‒ Risk of chemical burns! When opening the

detergent drawer, detergent and care products may splash out of

the appliance. Contact with eyes or skin may cause irritation.

▶

In case of contact with detergents or care products, rinse eyes

or skin thoroughly with clean water.

▶

Consult a doctor in case of accidental ingestion.

▶

Keep detergents and care products out of the reach of children.

1.6 Safe cleaning and maintenance

Observe the safety instructions when cleaning and maintaining the

device.

WARNING ‒ Risk of electric shock! Improper

repairs are dangerous.

▶

Only trained specialist personnel may carry out repairs on the

device.

▶

Only original spare parts may be used for repair of the device.

▶

If the power cord of this appliance is damaged, it must be

replaced by the manufacturer, its service agent or a similarly

qualified person in order to avoid a hazard. Penetrating

moisture can cause a shock.

▶

Do not use a steam cleaner, pressure washer, hoses or nozzles

to clean the appliance.

Summary of Contents for WM16XM50NL

























































Search results

Summary of Contents for WM16XM50NL

Reviews:

Related manuals for WM16XM50NL

Brands by name

Popular brands

Siemens WM16XM50NL, User Manual And Installation Instructions

Search results

Summary of Contents for WM16XM50NL

Reviews:

Related manuals for WM16XM50NL

Brands by name

Popular brands