Siemens WM16XKH0EU, Manual

Page: 17 / 72

Installation and connection
en
17
Water outlet connection types
This information is intended to help you
to connect this appliance to the water
outlet.
Note:
Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
ATTENTION!
When draining, the water outlet hose is
subject to water pressure and may
come loose from the installed connec-
tion point.
▶
Secure the water outlet hose against
unintentional loosening.
Drainage into a siphon.
Secure the connection
point with a (24–40
mm) hose clamp.
Drainage into a wash
basin.
Fix and secure the wa-
ter outlet hose with an
elbow.
Drainage into a plastic
pipe with rubber sleeve
or into a gully.
Fix and secure the wa-
ter outlet hose with an
elbow.
Connecting the appliance to the
electricity supply
Note:
Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
1.
Insert the mains plug of the appli-
ance's power cable in a socket
nearby.
The connection details of the appli-
ance can be found under Technical
data →
Page 69 .
2.
Check the mains plug is inserted
properly.
Aligning the appliance
In order to reduce noise and vibration
and to prevent the appliance from mov-
ing, align the appliance correctly.
Note:
Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
1.
Loosen the lock nuts using a WAF
17 wrench by turning it in a clock-
wise direction.
2.
To align the appliance, turn the ap-
pliance feet. Check that the appli-
ance is level using a spirit level.
All appliance feet must stand firmly
on the ground.
3.
Screw the lock nuts tightly against
the housing using a WAF 17 wrench.