background image

Additional programme settings    

en

37

After starting the programme

, you can 

add or remove laundry if necessary. 

~

 Page 41

\

Additional programme 

settings

Additional programme settings 

An overview of all additional settings, 

which can be selected depending on 

the programme, can be found from 

~

 Page 30

.

speedPerfect 

G

Washing in a shorter time while 

achieving a washing result that is 

consistent with, but uses more energy 

than, the selected programme, without 

the speedPerfect 

G

 setting.

Note:  

Do not exceed the maximum 

load.

Overview of programmes 

~

 Page 30

ecoPerfect 

¦

Energy-optimised washing by reducing 

the temperature while achieving a 

washing result that is consistent with the 

selected programme, without the 

ecoPerfect 

¦

 setting.

Prewash 

!

For heavily soiled laundry.

Note:  

Pour detergent into 

compartments 

I

 and 

II

.

Extra Rinse 

l

Additional rinse cycle for particularly 

sensitive skin and/or for areas with very 

soft water.

Less Ironing 

æ

Reduces creasing thanks to a special 

spin sequence followed by fluffing and 

reduced spin speed.

Note:  

The washing's residual moisture 

is increased.

sensoFresh Intensity 

î

The intensity of the active oxygen 

treatment can be set at 2 levels:

1

Operating the 

appliance

Operating the appliance

Preparing the washing 

machine

Note:  

The washing machine 

must be 

correctly installed

 and 

connected

From 

~

 Page 14

.

1.

Connect the mains plug.

2.

Turn on the tap.

3.

Open the door.

4.

Check that the drum is completely 

drained. Drain if necessary.

Ù

normal; for light odours

Ú

intensive; for strong odours 

(cigarettes, kitchen odours)

Summary of Contents for WM16W760ME

























































Reviews: