en
Intelligent dosing system
28
Below is an example of detergent
dosages on a packaging label:
The default setting for the basic dosage
is set specifically according to the area
in which you live (e.g. 75 ml for
detergent and 36 ml for fabric softener).
To achieve optimum washing and
rinsing results, please set your basic
dosage depending on your detergent,
the water hardness in your area and the
fabric softener you use.
Notes
■
Reduce the basic dosage if using a
very concentrated detergent.
■
If large amounts of foam are
repeatedly created during washing,
please check your basic dosage and
dosage strength settings.
Certain types of liquid detergent can
also create excessive amounts of
foam. If your basic dosage and
dosage strength settings are correct,
we advise you to use a different
detergent.
Changing the basic dosages:
1.
Press the corresponding i-Dos
button (
ô
or
i
) for approx. 3
seconds. The preset basic dosage
will appear in the display panel.
2.
Set the required basic dosage using
the
Ready in -
or
+
buttons.
3.
The setting is activated without
needing to be confirmed. You can
now wait for a short while or press
any button (except the i-Dos buttons)
to revert to the original setting.
Note:
The settings are saved until
they are changed again, even if the
machine is switched off.
Manual dosage
For programmes that cannot be used
with intelligent dosage, or if you would
prefer to dose manually (in which case
set intelligent dosage to "off"
ö
), add
detergent to compartment
À
Á
.
Cleaning aids such as water softener,
bleach and stain remover can be added
to this compartment in addition to the
intelligent dosage.
:
Warning
Eye/skin irritation!
Detergent and care products may spray
out if the detergent drawer is opened
while the machine is in operation.
Open the drawer carefully.
Rinse eyes or skin thoroughly if they
come into contact with detergent/care
products.
If swallowed accidentally, seek medical
advice.
Caution!
Damage to the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain removers,
prewash sprays, etc.) may cause
damage if they come into contact with
the surfaces of the washing machine.
Do not allow these agents to come into
contact with the surfaces of the washing
machine. If necessary, immediately wipe
away spray residue and other residues/
droplets with a damp cloth.
Notes
■
When dosing all detergents,
cleaning aids and cleaning agents,
always follow the manufacturer's
instructions.
Degree of
soiling
→
Water
hardness
↓
light
normal
heavy
very heavy
soft/medium 55 ml
75 ml
120 ml 160 ml
hard/very
hard
75 ml
95 ml
150 ml 180 ml
