Siemens WM14VMH0NL, User Manual And Installation Instructions, Page: 64 / 76

NL Troubleshooting
Malfunction
Cause and Troubleshooting
Program centrifugal
run does not start.
Remark: If possible, place large and small items of
laundry together in the drum. Laundry of different
sizes is more evenly distributed when spinning.
▶
Start the program Centrifuge.
fizzing, hissing
loud.
Water is flushed into the detergent drawer under
pressure.
▶
No error - normal operating noise.
Loud noise during
spinning.
The appliance is not leveled properly.
▶
Adjusting the device
Device feet are not fixed.
▶
Secure the device feet. Setting the appli-
raat
Transport protections have not been removed.
▶
Remove transport locks
Clapping, clattering
in the pump.
A foreign object has entered the pump.
▶
→ "
Cleaning the drain pump", page 52
Slurping, rhythmic
suction sound.
Pump is active, the water is being pumped out.
▶
No error - normal operating noise.
wrinkling. Spin speed is too high.
▶
For the next wash, set a lower spin
speed in.
The load quantity is too high.
▶
During the next wash, reduce the load
amount of.
The wrong program has been selected for the type of
fabric.
▶
Select a suitable program for the type of fabric.
→ "Programs", Page 26
Detergent or laundry detergent
softer drips from
the cuff and collects
on the door or in the
cuff fold.
Too much detergent/fabric softener in the detergent
drawer.
▶
When dosing the liquid detergent and
fabric softener on the marking in the detergent drawer
and do not dose above that.
Spin result is
not to satisfaction-
ness. The laundry is
too wet / too damp.
Low spin speed is set.
▶
For the next wash, set a higher spin
speed in.
▶
Start the program Centrifuge. Anti
wrinkleis activated.
64