Siemens WM14VMH0NL, User Manual And Installation Instructions, Page: 46 / 76

NL Home Connect
a The device is connecting
with the Smart Energy system
(energy manager).
aWhen the display shows and
is displayed, the device is
successfully connected to the
energy manager.
expiry of the set time period. The
program ends when this time
frame has elapsed.
Onote
The Flex Start is deactivated
for safety reasons under the
following conditions:
4.
If the device is to be started by the
Smart Energy system (energy
manager), activate Flexstart.
→ "Activating Flexstart", Page 46
¡ Press Start/Refill
.
¡ Open the door.
¡ Turn off the device.
¡ Power cut.
Activate Flexstart
Activate Flexstart so that your Smart
Energy system (energy manager) can
start your device when your own PV
system generates sufficient energy or
the electricity tariff is low.
15.5 Activate WiFi on the device
Remark: The energy consumption
increases compared to the values
indicated in the consumption value
tables when Wi-Fi is activated.
Required: The Smart Energy system
(energy manager) can only start the
device when the Smart Energy
system (energy manager) and the
device are connected.
1.
Approx. 3 s onControl via app
pressure-
know.
2.
Set program to position 4.
1.
Set the desired programme.
a The display shows Con reflected
to give.
2.
Press - Ready in +
and set the
.
desired time period.
3.
Press Start/Refill until
the display on displays.
3.
Press Start/Refill
4.
Press Control via app .
aWiFi is activated.
a The display shows and the
Flexstart is activated. The device is
waiting for a remote start via the
Smart Energy system (energy
manager).
aWhen the display shows the weather
If the time goes to eg 8 h, the
Smart Energy system (energy
manager) has set a time at which
the device will start.
aWhen the Smart Energy system
tem (energy manager) the
appliance does not start within
the set time, the appliance starts
the program independently before
Remark: The device does not turn off
automatically when WiFi is activated.
15.6 Deactivate WiFi on the
device
1.
On for at least 3 seconds Operate
to press. via app
2.
Set program to position 4.
a The display shows Con reflected
to give.
3.
Press Start/Refill until
the display OFF displays.
aWiFi is deactivated.
46