
Cleaning and maintenance NL
3.
Loosen the hose clamp and carefully
pull off the water drain hose.
17.8 Clean the strainer in the
water supply.
Empty the water inlet hose
To clean the strainer, first empty the
water inlet hose.
1.
Close the water tap.
2.
Set a schedule, but
not Rinse, Spin or Drain.
3.
Start program and let it run for
approx. 40 seconds.
4.
Turn off the device.
5.
Disconnect the plug of the device
from the mains.
Residual water can run!
4.
Clean the water drain hose and the
siphon connection.
Cleaning the strainer of the water tap
Remark: Take the information on the
topic of safety
Page 11 take care of your device
to use safely.
Required: The water supply hose is
empty.
1.
Remove the water inlet hose from
the water tap.
5.
55
Summary of Contents for WM14VMH0NL
Page 57: ...Cleaning and maintenance NL 5 Connect the hose and check for leaks 2 1 57 ...
Page 73: ......
Page 74: ......
Page 75: ......