Siemens WM14UQ92GB, User Manual And Installation Instructions

Page: 41 / 68

Basic operation en
41
2.
Slide the measuring aid forwards.
3.
Fold the measuring aid down and
click it into place.
4.
Push in the detergent drawer.
13.8 Adding detergent and
care product
Notes
¡
Please read the information in the
Safety → Page 4 and Preventing
material damage → Page 11 sec-
tions to ensure that you use the
appliance safely.
¡
Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
Requirement: Find out the optimum
dosage for detergent and care
product.
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→ "Detergent drawer", Page 20
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.9 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶ Press .
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
If you start a programme with act-
ive oxygen, the drum lights up
after the programme starts and the
mist that is created can be seen.
13.10 Adding laundry
Notes
¡
Please read the information in the
Safety →
Page 4
and Preventing
material damage →
Page 11
sec-
tions to ensure that you use the
appliance safely.
¡
If you a start a programme with
active oxygen, you cannot add any
laundry after the programme has
started.
1.
Press .
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
2.
Add or remove laundry.
3.
Close the door.
4.
Press .