en
Faults and what to do about them.
42
Odours in the washing
machine.
Run the
ä
Drum Clean
î
or
Î
Cottons
90 °C
programme without laun-
dry.
Add standard washing powder or a detergent that contains bleach.
Note:
To prevent foaming, only use half the amount of detergent recommended
by the detergent manufacturer. Do not use detergents that are intended for wool
or delicates.
The
o
indicator has lit up
in the touch display. Foam
may also be leaking from
the detergent drawer.
Have you used too much detergent?
Mix one tablespoon of fabric softener with half a litre of water and pour it into
compartment
II
(not suitable for outdoor clothing, sportswear or items made
with down).
Use less detergent for the next wash cycle.
Loud noises, vibrations
and machine “wander-
ing” during the spin cycle.
■
Is the appliance level? Level the appliance.
■
Are the appliance's feet secured? Secure the appliance's feet.
■
Have the transport braces been removed? Remove the transport braces.
The touch display does
not work while the appli-
ance is running.
■
Has there been a power failure?
■
Have the fuses blown/has the circuit breaker tripped? Switch on the circuit
breaker/replace the fuses.
■
If the fault occurs repeatedly, call the after-sales service.
There are noises after the
programme starts
sensoFresh
î
.
Not a fault – the appliance is filled with water to create mist and operating
noises from the fan can be heard.
Water stains on dry laun-
dry after the
sensoFresh
î
pro-
gramme.
■
Was residual water removed before laundry was added?
■
Level the appliance. The active oxygen treatment can only work properly if
the appliance is levelled correctly.
Noises can be heard after
the sensoFresh
î
pro-
gramme.
When removing laundry at the end of the programme, you may notice an odour
produced by the natural by-products of the active oxygen. Shake out the laundry
briefly.
Odour has not been
removed satisfactorily
after the sensoFresh
î
programme.
■
The active oxygen treatment is less effective if the drum is dirty. Run the
ä
Drum Clean
î
programme before using the appliance for the first time,
and regularly thereafter.
■
Have you loaded too much laundry? Do not exceed the maximum load.
■
Have you selected a high enough intensity? Select a higher intensity.
There is detergent resi-
due on the laundry.
■
Some phosphate-free detergents contain water-insoluble residue.
■
Select
q
Rinse
or brush the laundry after washing.
When the appliance is
paused,
‹
flashes and
®
lights up.
■
The water level is too high. It is not possible to add laundry. Close the door
immediately if necessary.
■
Touch
‹
to continue the programme.
Faults
Cause/remedy
Summary of Contents for WM14T780ME
Page 47: ...6 ...
