Operating the appliance
en
31
1
Operating the
appliance
Operating the appliance
Preparing the washing
machine
Note:
The washing machine
must be
correctly installed
and
connected
.
From
1.
Connect the mains plug.
2.
Turn on the water tap.
3.
Open the door.
4.
Check that the drum is completely
drained. Drain if necessary.
Switching on the appliance/
selecting a programme
Press the
#
button. The appliance is
switched on.
The
Î
Cottons
programme set at the
factory is then always displayed.
The current settings and programme
information light up at full brightness
and the display
‹
flashes.
The settings that can be selected light
up at half brightness.
Notes
■
Temporary flashing of the display
ä
informs you to run the programme
ä
Drum Clean
î
or any other
programme soon at a washing
temperature of at least 60 °C.
■
If the
w
3 sec display flashes, the
childproof lock is active.
You must deactivate this first before
you can change settings or start the
programme.
In appliances with a
drum light
:
The drum is lit after switching on the
appliance, after opening and closing the
door and after starting a programme.
The light switches off automatically.
You can:
■
Use this programme and load
■
Or select another programme.
You can find an overview of all
programmes on the printed
supplement for the installation and
operating instructions.
■
Or change the programme default
■
And/or select additional programme
Change the programme
default settings
To change the current settings, touch
the button you require on the control
panel and the relevant indicator will
switch to full brightness.
You can change Finish in-time by
touching
N
or
M
.
Programme default settings
Select additional programme
settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
To do this, touch the required control
panel; the relevant display switches to
full brightness.
Additional programme settings
Summary of Contents for WM14T780ME
Page 47: ...6 ...
