en
Additional programme settings
16
After the start, the preselected time e.g.
8 h
is displayed and the time counts
down to the start of the wash
programme. The programme duration is
then displayed, e.g.
2:30
(hours:minutes).
Changing the preselected time:
You can change the preselected time
after the start of the programme as fol-
lows:
1.
Press Start/
Reload
!
.
2.
Press the
(Ready in)
5
button
repeatedly until the required number
of hours is displayed.
3.
Press the
Start
/Reload
!
button.
Adding laundry while the preselected
time continues running:
1.
Press Start/
Reload
!
.
2.
The symbols
YES
and
v
light up on
the display panel. The washing
machine door can be opened and
laundry can be added.
3.
Close the washing machine door.
4.
Press the
Start
/Reload
!
button.
The preselected time continues to
run.
\
Additional programme
settings
Additional programme settings
speedPerfect
(
For washing in a shorter time with a
washing result comparable to that of the
standard programme.
Notes
■
Do not exceed the maximum load.
Overview of programmes
■
speedPerfect
(
is preset by
default. To deactivate this additional
default setting, press the
speedPerfect
(
button. The indica-
tor light goes off.
ecoPerfect
¦
For saving energy with a washing result
comparable to that of the standard
programme.
Water Plus
z
Increased water level and additional
rinse cycle, extended washing time. For
areas with very soft water or for further
enhancing the spin result.
1
Operating the appli-
ance
Operating the appliance
Preparing the washing
machine
Note:
The washing machine
must be
correctly installed
and
connected
.
1.
Connect the mains plug.
2.
Turn on the water tap.
3.
Open the door.
4.
Check that the drum is completely
drained. Drain if necessary.
