Basic operation
en
31
a
After the programme has ended,
the display shows: "End".
Adjusting the "Ready in" time
before the programme starts
You can readjust the selected "Ready
in" time before the programme starts.
1.
Press
Start / Reload
.
2.
Press
Ready in
repeatedly until the
display indicates the desired
"Ready in" time.
3.
Press
Start / Reload
.
Soaking laundry
You can soak the laundry before
washing in the appliance by pausing
the programme.
Note:
No additional detergent is re-
quired. The soaking solution is then
used for washing.
1.
Start the programme.
2.
To pause the programme, after ap-
prox. 10 minutes, press
Start / Re-
load
.
3.
To resume the programme, after
the desired soaking time, press
Start / Reload
.
Adding laundry
Note:
Please read the safety informa-
to ensure that you use
the appliance safely.
1.
Press
Start / Reload
.
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
→
2.
Add or remove laundry.
3.
Close the door.
4.
Press
Start / Reload
.
Cancelling the programme
Once the programme has started,
you can cancel it at any time.
Note:
Please read the safety informa-
to ensure that you use
the appliance safely.
1.
Press
Start / Reload
.
2.
Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
Rinse
فطش
programme.
– If the water level is high: Start
the
Spin
رصع
or
Drain
غيرفت
pro-
gramme.
3.
Remove the laundry.
Resuming the programme
when the programme status
is Rinse Hold
1.
Set the
Spin
رصع
or
Drain
غيرفت
pro-
gramme.
2.
Press
Start / Reload
.
Unloading the laundry
Note:
Please read the safety informa-
to ensure that you use
the appliance safely.
1.
Open the door.
2.
Remove the laundry.