Siemens WM10J170GC, User Manual And Installation Instructions

Page: 30 / 52

en
Basic operation
30
2.
If necessary, adjust the pro-
gramme settings →
Page 30 .
Adjusting the programme set-
tings
Depending on the programme and
programme progress, you can adjust
or activate/deactivate the settings.
Note:
Overview of all programme set-
tings:
→
"Buttons", Page 24
Requirement:
A programme has
been set.
▶
Adjust the programme settings.
The programme settings are not
saved permanently for the pro-
gramme.
Loading laundry
Notes
¡
Please read the safety information
→
Page 4 to ensure that you use
the appliance safely.
¡
To prevent creasing, take note of
the maximum load for the relevant
programme →
Page 21 .
Requirement:
Prepare and sort the
laundry.
→
"Laundry", Page 26
1.
Open the door.
2.
Ensure that the drum is empty.
3.
Separate the laundry and place it
in the drum.
4.
Note:
Ensure that there is no laun-
dry trapped in the door.
Close the door.
Adding detergent and care
product
Note:
Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
Requirement:
Find out the optimum
dosage for detergent and care
product. →
Page 28
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
"Detergent drawer", Page 18
3.
If required, add the care product.
4.
Push in the detergent drawer.
Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press
Start / Reload
.
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.