background image

Operating the appliance       

en

19

Notes

To remove the laundry at the end of 

the programme,deactivate the 

childlock.

The childlock remains active, even 

once the appliance has been 

switched off.

If the appliance is switched off while 

the programme is running and 

childlock is activated, the 

programme continues when the 

appliance is switched back on.

Adding/removing laundry

After starting the programme, you can 

add or remove laundry if necessary.
Touch the 

I

 button. The appliance 

checks whether reloading is possible. 

If the following appears on the Touch-

Display:

The symbol 

Œ

 disappears, reloading 

is possible.

The symbol 

Œ

 lights up, reloading is 

not possible. 

To continue the programme, touch the

 

I

 button. The programme continues 

automatically.

Notes

Do not leave the door open for too 

long when adding laundry as water 

from the laundry may leak out.

For safety reasons, the door remains 

locked when the water level or 

temperature is high, or while the 

drum is turning, and it is not possible 

to add laundry during this time.

Changing the programme

If you have started the wrong 

programme by mistake, you can 

change the programme as follows:

1.

Touch the 

I

 button.

2.

Select another programme.

3.

And touch the 

I

 button again. The 

new programme starts from the 

beginning.

Cancel the programme

For programmes at high temperatures:

1.

Touch the 

I

 button.

2.

To cool down laundry: Select 

q

 Rinse

/Spin 

0

3.

And touch the 

I

 button again.

For programmes at low temperatures:

1.

Touch the 

I

 button.

2.

Select 

q

 Rinse/

Spin 

0

.

3.

And touch the 

I

 button again.

Programme end during rinse 

hold

The 

I

 button flashes on the Touch-

Display, and the preset spin speed and 

remaining programme length are 

displayed for the selected programme.

Continue the programme by: 

Touch the 

I

 button or

Change the spin speed (if 

necessary) and then touch the 

I

 

button again.

Note:  

If the water only needs to be 

drained, touch the 

I

 button approx. 

1 minute after the programme starts, 

before the spin cycle begins. Then 

switch the appliance off. The 

programme is interrupted and the 

door lock is released. The laundry 

can be removed.

Programme end

End

 lights up on the Touch-Display and 

I

 and 

Œ

 diaplays are off.

Summary of Contents for WM..U...









































Reviews: