en
Operating the appliance
16
Memory programme
(
â
)
You can save a selected programme
with your favourite settings here.
To store
:
1.
Switch on the appliance.
2.
Select a programme.
3.
If required, change the programme
default settings and/or select
programme additional settings.
4.
Touch and hold
â
button for approx.
three seconds.
The programme is saved if all of the
settings flash briefly.
To use the saved programme, touch
â
button briefly after you switch on the
appliance.
To change the saved programme, touch
and hold
â
button again for approx.
three seconds after selecting the new
settings.
Silent wash
(
ç
)
Briefly touch the
ç
button to activate
the setting.
Reduced noise values thanks to special
wash and spin cycle and deactivated
end signal. Especially suitable for
washing at night.
Note:
Residual moisture of the washing
is slightly increased.
1
Operating the
appliance
Operating the appliance
Preparing the appliance
The appliance was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
ä
Drum Clean
programme.
Before washing for the first time
~
Page 38
Notes
■
Never switch on a damaged
appliance!
■
Inform customer service!
1.
Insert mains plug.
:
Warning
Risk of death from electric shock!
Risk of death if live parts are
touched.
– Never pull out the mains plug by
tugging the power cord.
– Insert/pull out the mains plug
with dry hands only.
2.
Turn the tap on.
3.
Open the appliance door.
