Setting the signal
en
41
M
Setting the signal
Setting the signal
1. Activate setting mode for the signal volume
Turn to
$
Off
.
Turn one position
clockwise.
Press and hold
Temp.
turn one position clockwise.
Release the button, figure
apperas in the display.
2.a Set the volume for the button signals (depending on model)
Touch the
Finish in
button until the
required volume is reached
Go to step 3. or
Set to
$
Off
, switch exits setting mode for
the signal volume.
2.b Selecting the volume for the information signals
Turn one position clockwise.
Touch the
Finish in
button
until the required volume is
reached.
Set to
$
Off
, which exits setting
mode for the signal volume.
Summary of Contents for WD14H422GB
Page 51: ...6 ...
