background image

Safety instructions    

en

11

If you pour the wrong 

quantity of detergent or 

cleaning agent into the 

appliance, this may result in 

material damage or damage 

to the appliance.

Use detergents/care 

products/cleaning agents 

and softeners in accordance 

with the manufacturers' 

instructions.

Cleaning/Maintenance

:

Warning

Risk of death!

The appliance is powered by 

electricity. There is a risk of 

electric shock if you come into 

contact with live components. 

Therefore please note:

Switch off the appliance. 

Disconnect the appliance 

from the power supply (pull 

out the plug).

Never take hold of the mains 

plug with wet hands.

When removing the mains 

plug from the socket, always 

take hold of the plug itself 

and never the mains cable, 

otherwise this may damage 

the mains cable.

Do not make any technical 

modifications to the 

appliance or its features.

Repairs and any other work 

on the appliance must only 

be conducted by our 

customer service or by an 

electrician. The same applies 

for replacing the mains cable 

(when necessary).

Spare mains cables can be 

ordered from our customer 

service.

:

Warning

Risk of poisoning!

Poisonous fumes may be given 

off by cleaning agents that 

contain solvents, e.g. cleaning 

solvent.

Do not use cleaning agents that 

contain solvents.

:

Warning

Risk of electric shock/material 

damage/damage to the 

appliance!

If moisture penetrates the 

appliance, this may cause it to 

short circuit.

Do not use a pressure washer, 

steam cleaner, hose or spray 

gun to clean your appliance.

Summary of Contents for WD14H422GB





















































Reviews: