Siemens WAU28SS9DN User Manual And Assembly Instructions Download Page 40

Page: 40 / 68

Basic operation

Press

Cancelling the programme

Once the programme has started,
you can cancel it at any time.

Note:

Please read the information in

the "Safety" →

Page 4

and "Prevent-

ing material damage" →

Page 11

sec-

tions to ensure that you use the appli-
ance safely.

Press

Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start

the

Rinse

programme.

– If the water level is high: Start

the

Spin

Drain

programme.

Remove the laundry.

Resuming the programme
when the programme status
is Rinse Hold

Set the

Spin

Drain

programme.

Press

Unloading the laundry

Note:

Please read the information in

the "Safety" →

Page 4

and "Prevent-

ing material damage" →

Page 11

sec-

tions to ensure that you use the appli-
ance safely.

Open the door.

Remove the laundry.

Switching off the appliance

Turn the programme selector to

Off

Turn off the tap.

Wipe the rubber gasket dry and re-
move any foreign objects.

Leave the door and detergent
drawer open so that residual water
can evaporate.

Summary of Contents for WAU28SS9DN





































































Search results

Summary of Contents for WAU28SS9DN

Reviews:

Related manuals for WAU28SS9DN

Brands by name

Popular brands

Siemens WAU28SS9DN, User Manual And Assembly Instructions

Search results

Summary of Contents for WAU28SS9DN

Reviews:

Related manuals for WAU28SS9DN

Brands by name

Popular brands