Siemens WAU28SS9DN, User Manual And Assembly Instructions

Page: 25 / 68

Buttons
en
25
Buttons
Buttons
Buttons
Below is an overview of the buttons and their setting options.
The selection of programme settings depends on the selected programme. You
can see the selection options for each programme in the overview for
→
"Programmes", Page 27 .
Button Selection Description
(Start/Reload) ¡ Start
¡ Cancel
¡
Pause
Start, cancel or pause the programme.
(SpeedPerfect) ¡ Activate
¡ Deactivate
Activate or deactivate a short washing pro-
gramme.
Note: Energy consumption increases.
The washing result is not affected by this.
i-DOS
¡
Activate
¡ Deactivate
¡ Basic dosage
Briefly press the button to activate or deactivate
the intelligent dosing system for fabric softener
or liquid detergent .
Press the button for approx. three seconds to set
the basic dosage.
→
"Intelligent dosing system", Page 41
(Finish in) 1–24 hours Set the programme end.
The programme duration is already included in
the set number of hours.
Once the programme has started, the pro-
gramme duration is displayed.
Note: Use the button to adjust the basic dosage.
→
"Adjusting the basic dosage", Page 42
(Temperature) – 90 °C Adjust the temperature in °C.
(Spin) - - - - - 1400 Adjust the spin speed or activate - - - - (Rinse
Hold).
If - - - - is selected, the water is not drained at the
end of the washing cycle and the spin cycle is de-
activated. The laundry remains in the water used
for rinsing.
Note: Use the button to adjust the basic dosage.
→
"Adjusting the basic dosage", Page 42
⁠ 3 sek. (Child Lock
3 sec.)
¡ Activate
¡
Deactivate
Activate or deactivate the childproof lock.
Disable the control panel to prevent unwanted or
accidental operation.
If the childproof lock is activated and the appli-
ance has been switched off, the childproof lock
remains activated.
→ "Childproof lock", Page 41