Siemens VS08G2090, Instructions For Use Manual

Page: 14 / 146

10
en
Disposal information
䡲
Packaging
The packaging protects the vacuum
cleaner from damage during transportation.
It is made of environmentally-friendly
materials and can be recycled.
Dispose of unneeded packaging at the
appropriate recycling points.
䡲
Used vacuum cleaner
Used appliances still contain many
recyclable materials.
You should therefore take your used
vacuum cleaner to your retailer or recycling
centre so that it can be recycled.
For current disposal methods, please
enquire at your appliance dealership or
local council.
!
Please note
If a fuse should blow when you switch on
the vacuum cleaner, this may be because
other electrical appliances which have a
high current draw are connected to the
same power circuit.
Tripping a fuse may be avoided by
selecting the lowest power level before
switching on the appliance.
Fold out picture pages.
Commissioning
Figure
a)
Insert the suction hose connector into the
suction opening until it clicks into place.
You must ensure that the plug-in part of the
suction hose connector is inserted into the
appliance socket.
b)
To remove the suction hose, press the two
lugs together and pull out the hose.
Figure
Slide the handle into the telescopic tube
until it clicks into place.
You must ensure that the plug-in part of the
telescopic tube is inserted into the
corresponding recess on the handle.
Press on the unlatching sleeve and pull out
the handle to disconnect.
Figure
䡲
Attach the carpet lifter to the nozzle.
䡲
Press the carpet lifter sideways to engage.
Figure
a)
Slide the telescopic tube into the floor
nozzle connection piece until it clicks into
place.
a)
Slide the telescopic tube into the
electromatic brush connection piece until it
clicks into place.
You must ensure that the plug-in part of the
telescopic tube is inserted into the
corresponding recess on the electromatic
brush connection piece.
An electrical contact with the vacuum
cleaner is established when the plug-in
part is engaged.
Press on the unlatching sleeve and pull out
the telescopic tube to disconnect.
4
3
2
1