APOGEE
Wireless
U
s
er
Gui
de
Starting the TLX
Before You Begin
Before using the TLX, do the following to enable the TLX to communicate over the wireless network:
•
Set the TLX Channel to the same Channel as the WFLN.
•
Set the TLX Network ID to match the WFLN Network ID.
•
Place the TLX within communication range of the WFLN.
•
Connect the TLX to a laptop computer and plug in the power cable (see Figure 2). If needed,
terminate the power cable wires for the TLX power connector as follows: E=green, H=red, N=black.
Verify that the TLX is communicating properly; the LED should be green and blinking quickly.
9-pin to RJ-11
RS-232 Cable
P/N: 540-143
Laptop
TLX
TLX Kit
P/N 563-006
(Includes: TLX,
Antenna, Power Cable,
24 Vac Transformer)
WLAN0012R1
Figure 2.
TLX Connections.
4
Revision Date: June 20, 2006
Siemens Building Technologies, Inc.
CONFIDENTIAL: For Internal Use Only