Siemens TLX, User Manual, Page: 12 / 21

APOGEE Wireless U s er G u i de
Checking Node Bindings (BINDING)
Use the BINDING command to view which devices are communicating with the node and check that the
Node Binding table is correct. Each in-use binding table entry is listed in the order that the TLX receives it.
The BINDING FPX command is especially useful for verifying that the FPX has
established bindings (wireless communication links) with each of the FLNXs on the
WFLN.
To check the node bindings:
1. Type one of the following:
• BINDING TLX
• BINDING FPX
• BINDING FLNX x (where x is the FLN device address (drop))
• BINDING FLNX y (where y is the FLNX EUID)
2. Press ENTER .
The following example shows a Node Binding table for an FPX. The table shows all of the devices that
communicate with that FPX.
>BINDING FPX
----- Node Binding Table -----
00 M 00000000000001A3 BCAST
01 UNUSED
02 S 000D6F000005608A TLX
03 S 000D6F0000055FAD FLNX-0
04 S 000D6F0000055F9D FLNX-12
05 S 000D6F0000055FB2 FLNX-13
06 S 000D6F0000055FB0 FLNX-3
07 S 000D6F0000055FBA FLNX-19
08 S 000D6F0000055FB6 FLNX-16
09 S 000D6F0000055FB5 FLNX-21
0A S 000D6F0000055FC0 FLNX-17
0B UNUSED
...
5F UNUSED
----- Node Binding Table Complete -----
EUID
Overall WFLN
Sequenced
Messages
Initiated
WLAN0039R1
Figure 5. Example Results from the TLX BINDING Command.
12 Revision Date: June 20, 2006
Siemens Building Technologies, Inc. CONFIDENTIAL: For Internal Use Only