12
en
Menu settings
Menu settings
■ Hold down the
j
button
7
for at least
3 seconds.
The different setting options are now
displayed.
Settings
Coffee temp.
Hot water temp.
<85°C
Exit profile
The different setting options can be selected
with the selection buttons
<
and
>
4
.
Note:
The changes you have made are
saved automatically. It is not necessary
to confirm them additionally. If no entry is
made after approx. 2 minutes, the menu will
close automatically.
The following settings can be selected:
Language
■ Turn the rotary knob
6
to select the
required language.
Coffee temp.
■ Turn the rotary knob
6
to set the coffee
temperature. The setting applies to
all types of preparation, except the
customised settings under “Customising”.
Hot water temp.
■ Turn the rotary knob
6
to set the
temperature. The setting applies to
all types of preparation except the
customised settings under “Customising”.
Exit profile
■ Here you can set whether the appliance
should exit the customising function
automatically
automatic
or manually
manually
.
Auto off after
■ Turn the rotary knob
6
to enter the time
span after which the appliance should
automatically switch off following the last
drink preparation.
A time between 5 minutes and 8 hours can
be set.
Cup warm. off in
(depending on the model)
Here you can set the time span after which
the cup warmer
27
switches off again
automatically.
■ Set the required time by turning the rotary
knob
6
.
Contrast
The display
5
contrast can be set from
–10
to
+10
. The factory setting is
+0
.
■ Turn the rotary knob
6
to select the
required setting.
Water hardness
■ Turn the rotary knob
6
to select the
required water hardness
1, 2, 3
or
4
.
Info:
It is important to set the water
hardness correctly, so that the appliance
indicates accurately when the descaling
programme should be run. The factory
setting for the water hardness is
4
.
If a
water softener is installed in the house,
please set the water hardness to level
3
.
You can check the water hardness using
the enclosed test strip or by asking your
local water supplier.
■ Dip the test strip briefly in water and
check the result after one minute.
Level
Water hardness
German (°dH) French (°fH)
1
2
3
4
1-7
8-14
15-21
22-30
1-13
14-25
26-38
39-54
Summary of Contents for TE 803 series
Page 4: ...C D E 23b 24 23c 23a 10a 10c 10d 10b 14 13 ...
Page 5: ...1 21 20a 2 2 1 F 22 19 20b 20 ...
Page 163: ......
