Table 6-11
SNMP V2 Trap-Destination Table
Settings
Comments
Index
1 to 6
IP-Address
IP address of trap destination (NMS)
Community String
Actual community string
Must be identically with the community string in the NMS
UDP Port
Range: from 1024 to 65 535
11
Default: 162 (well known port for traps)
Must be identically with the number in the NMS
Enabled
On ( ) or off ( )
Default: off (
Send
Send the values to the PU4 module.
Reset
Reject the changes.
The NMS addresses as well as the community string for SNMP get or set command must be adjusted via web
logon and must match between the SNMP agent and the NMS.
Access Password
Within this menu, you can set the SNMP read-only and read-write community string. The read-write
community string can also be used as the password for web login.
[scaccpas-300414-01, 1, en_US]
Figure 6-21
Access Password
6.2.4.3
11
Range for UDP Port: 0 to 65 535, but well known ports up to 1023 must not be used. Exception for SNMP: Port 161: get and set, Port
162: traps
SNMP and Remote Access
6.2 SNMP
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
291
C53000-G6040-C605-1, Edition 03.2020
